welcomeDongguan Zhigao Industrial Co., Ltd.!
hot key words:Radiator, aluminum products, aluminum profile, heat dissipation aluminum, aluminum heat sink, aluminum profile shell, aluminum panel, led radiator, audio radiator
company news
Your current location is: 首页>>News Center>>company news

What material is suitable for making radiators?

release time:2020-04-21 16:12:55  Views: 568
The performance of the radiator directly affects the heat dissipation effect of the product, and then has a great impact on the economy and reliability of the product. With the continuous enhancement of product performance, the heat load is getting higher and higher, and the requirements for cooling systems are getting higher and higher. People are paying more and more attention to the research of cooling systems including radiators. New technologies and new materials are constantly emerging. Under the premise of ensuring that the radiator has sufficient heat dissipation capacity and strength, smaller size, lighter weight, and higher heat dissipation efficiency have become an inevitable trend for the development of radiators.



JNO4Ypnu_YgF9.jpg

In this case, the heat dissipation coefficient is an important parameter to evaluate the heat dissipation performance of the radiator. There are many influencing factors, among which the thermal conductivity of the radiator material and the welding quality have a great influence on it. Increasing the heat dissipation coefficient can improve the heat dissipation efficiency, so that the heat sink can achieve the best heat dissipation effect with a smaller size and quality. Therefore, thermal conductivity is very important to the heat sink material.


BHLDbmAb_pKuO.jpg

The working conditions of the radiator are bad, and some radiators have long-term flow of coolant, which may be mixed with corrosive and harmful components, which have rust and corrosion effects on the radiator. Therefore, in order to ensure the reliable heat dissipation of the radiator, the material performance of the radiator has the following requirements:


①  has good thermal conductivity


②  has a certain strength and strong corrosion resistance


③ Good processing performance and brazing performance.


④ Good economy.


OrYZqGCt_yIWg.jpg

Aluminum is the material of choice for radiators: the biggest advantage of aluminum is its light weight, with a specific gravity of only one-third of that of copper. With the same volume, the quality can be greatly reduced; aluminum resources are much richer and the cost is much lower than copper; The thermal conductivity of aluminum is lower than that of copper, only 60% of copper. However, due to the tin protection layer with lower thermal conductivity of copper radiators, the thermal efficiency of aluminum radiators is higher than that of copper radiators. In addition, aluminum is also It has good special processing performance: although aluminum radiator has the advantages of light weight, low raw material cost, and good heat dissipation performance.










Dongguan Zhigao Industrial Co., Ltd. specializes in processing aluminum automotive power amplifier radiators, aluminum home audio radiators and aluminum LED radiators.